What is the DPS 10HP MY-PS-10 used for?

The DPS 10HP MY-PS-10 is designed to convert single-phase power to three-phase power, specifically suitable for operating motors rated at 7.5HP (5.5kW) with a maximum current of 23A. This ensures that you can efficiently run higher-powered machinery or devices with single-phase power sources. This converter is beneficial for industrial setups, workshops, or home applications where three-phase power is not readily available but is required for specific motors.

How do I install the DPS 10HP MY-PS-10 converter?

Installation of the DPS 10HP MY-PS-10 requires basic electrical knowledge. First, ensure that the power is disconnected. Next, connect the input leads from your single-phase supply to the input terminals of the converter and the output leads to the motor. Proper grounding is crucial for safe operation. Always refer to the installation guide provided for specific detail. Following these steps, users in various operational environments can efficiently utilize three-phase motors, increasing productivity.

Can the DPS 10HP MY-PS-10 be used with any motor?

The DPS 10HP MY-PS-10 converter must be used with a motor rated at 7.5HP (5.5kW) and a maximum current draw of 23A. It is critical to ensure that you choose the right motor to avoid burning out the converter. This product is beneficial for industrial applications requiring a dedicated power source, such as manufacturing plants and machinery workshops that utilize specific motor-driven equipment.

What is the input and output voltage of the DPS 10HP MY-PS-10?

The DPS 10HP MY-PS-10 operates on an input voltage range of 200-240V. This means it can connect to standard single-phase supplies in various regions. The output will also be a three-phase voltage compatible with machinery designed to run on such electricity, providing a suitable and reliable power source for motor operations. Users in differing electrical environments can rely on this compatibility for their applications.

Is the DPS 10HP MY-PS-10 UL Listed?

Yes, the DPS 10HP MY-PS-10 is UL Listed, which means it has been tested and meets stringent safety standards set by Underwriters Laboratories. This certification ensures that the product has been designed with safety in mind, providing users with confidence during operation. Utilizing UL Listed equipment is vital in industrial and commercial settings to adhere to safety regulations while minimizing risks associated with electrical failures.

How does single to three-phase conversion work?

Single to three-phase conversion using the DPS 10HP MY-PS-10 utilizes specific electrical circuitry to generate three-phase power from a single-phase supply. The converter creates additional phases needed for three-phase operation, allowing for smoother motor operation with reduced torque ripple and improved efficiency. This is particularly beneficial for applications such as CNC machines or large industrial motors that perform optimally with three-phase power.

What precautions should I take when using the DPS 10HP MY-PS-10?

When using the DPS 10HP MY-PS-10, it's essential to ensure adequate ventilation as the unit may generate heat during operation. Regularly check all connections to avoid loose wires, and inspect for any physical damage. Always follow electrical safety protocols to reduce the risk of short circuits or overheating. Thus, ensuring proper safety measures in industrial settings can enhance operational efficiency while preventing equipment failure.

Can I use multiple motors with the DPS 10HP MY-PS-10?

No, each DPS 10HP MY-PS-10 must be used for one motor only. This limitation ensures that the converter can adequately provide the required power and stability necessary for optimal motor performance. Using one converter per motor allows for more precise control with reduced risk of overload, making it ideal for industrial applications where reliable motor operations are critical.

What types of applications is the DPS 10HP MY-PS-10 suitable for?

The DPS 10HP MY-PS-10 is suitable for a wide range of applications that require three-phase power, including industrial machinery, pumps, and various manufacturing equipment. Whether in a mechanical shop, food processing, or HVAC systems, this converter can provide the necessary power to run multiple motor types efficiently, enhancing productivity across numerous sectors.

Where can I buy the DPS 10HP MY-PS-10 in Bangladesh?

You can purchase the DPS 10HP MY-PS-10 from Ubuy, a trusted online platform offering a wide selection of electrical equipment and tools. Ubuy provides a user-friendly shopping experience, ensuring you find the right products quickly and easily. With options for comparison and purchase from various sellers, Ubuy is a reliable choice for acquiring the DPS converter in Bangladesh.

How to Shop DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Online From Ubuy?

It’s easy to shop DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase online from Ubuy. You just have to search for the product, choose your shipping method while checking out and get it delivered to your location.

Is DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Available to Shop Online in Bangladesh?

Yes, at Ubuy Bangladesh this product is available for you to shop at a reasonable price. The DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase is not available locally but you can trust us with our express shipping services.

How Long Does It Take to Get Product After Placing the Order?

The delivery time of your ordered product varies as per what you've ordered and the shipping method that you've chosen. The estimated delivery time is mentioned during the checkout process, so be carefree while shopping.

DPS

DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Converter, MY-PS-10 Must Be Only Used for 7.5HP(5.5kW) 23A 220V 3-Phase Motor, One DPS Must Be Used for One Motor Only, UL Listed | For 7.5HP(5.5kW) 23A Motor, Input/Output 200-240V, UL-Listed, 1 DPS per 1 Motor Only, Easy Set Up, Digital Phase Shifter

Drive 3 phase motor(220V) with 1 phase...3 phase motors can be used at your home

DPS

Item #: 12871774

DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Converter, MY-PS-10 Must Be Only Used for 7.5HP(5.5kW) 23A 220V 3-Phase Motor, One DPS Must Be

76% of respondents would recommend this to a friend

Item #: 12871774

BDT 36115

Price Details

Excluding Shipping & Custom charges ( Shipping and custom charges will be calculated on checkout )

^{*All items will import from US}

Availability : In stock

Imported from USA store

QTY:

Order now and get it around Wednesday, September 09

Secured transaction

Our Top Logistics Partners

Drive 3 phase motor(220V) with 1 phase...3 phase motors can be used at your home

U-Care Warranty:

None

Select a Plan

Fast
Shipping

Free
Return^*

Secure Packaging

100% Original Products

PCI DSS Compliance

ISO 27001 Certified

Note: Step Down Voltage Transformer required for using electronics products of US store (110-120). Recommended power converters Buy Now.

What Stands Out

Motor Compatibility

Designed specifically for 7.5HP motors, the DPS 10HP converter ensures seamless performance while effectively transforming single-phase power to three-phase, addressing a common need in industrial applications.

Reliable Power Conversion

Operating within a 200-240V range, this converter ensures stable and reliable power output for motors, thus improving efficiency and the lifespan of equipment in commercial settings.

UL Listed Safety

The DPS 10HP's UL listing guarantees compliance with stringent safety standards, providing peace of mind to users regarding quality and operational safety in demanding environments.

Product Details

Suitable for 7.5HP (5.5kW) 23amp 200-240V 3-phase motor
Converts single-phase to 3-phase power
Small size, light weight, and sealed design for protection against dust, moisture, and heat
Digital type phase converter with excellent start-up torque
Efficient with low failure rate and designed to be non-flammable
One unit is intended for use with one motor only

Brand	DPS
Model Number	MY-PS-10
Global Trade Identification Number	08809990014354
Unit Count	1 Count
Manufacturer	Myung Youn Electronics Co., Ltd.
Mfr Part Number	MY-PS-10-1
Input Voltage	220 volts_of_alternating_current
Output Voltage	220 volts_of_alternating_current
Plug Type	Type A
Number of Outlets	1
Power Source	AC
Item Weight	2.9 pounds (1.32 kg)
Item Dimensions	5.1 x 4.1 x 7.2 inches (13 x 10.4 x 18.3 cm)
Color	Grey
Item dimensions L x W x H	5.1 x 4.1 x 7.2 inches (13 x 10.4 x 18.3 cm)

Who Should Buy?

Small Businesses
Ideal for small businesses needing to convert single-phase power for 3-phase motors, enhancing operational efficiency.
DIY Enthusiasts
Great for hobbyists who want to utilize 3-phase machines at home without upgrading electrical systems significantly.
Manufacturing Units
Beneficial for factories using 7.5HP motors, facilitating seamless operation across various machinery.

High-Power Machines
Not suitable for motors exceeding 7.5HP as one DPS unit is limited to one motor application.

Product Description

DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Converter, MY-PS-10 Must Be Only Used for 7.5HP(5.5kW) 23A 220V 3-Phase Motor, One DPS Must Be Used for One Motor Only, UL Listed | For 7.5HP(5.5kW) 23A Motor, Input/Output 200-240V, UL-Listed, 1 DPS per 1 Motor Only, Easy Set Up, Digital Phase Shifter

Have any Query? Chat with us

Customer Questions & Answers

Question: How to Shop DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Online From Ubuy?

Answer: It’s easy to shop DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase online from Ubuy. You just have to search for the product, choose your shipping method while checking out and get it delivered to your location.
Question: Is DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Available to Shop Online in Bangladesh?

Answer: Yes, at Ubuy Bangladesh this product is available for you to shop at a reasonable price. The DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase is not available locally but you can trust us with our express shipping services.
Question: How Long Does It Take to Get Product After Placing the Order?

Answer: The delivery time of your ordered product varies as per what you've ordered and the shipping method that you've chosen. The estimated delivery time is mentioned during the checkout process, so be carefree while shopping.

DPS Power Converters MY-PS-10 Editorial Review

The MY-PS-10 model is recommended for a 7.5 hp mixer with 23 amps and 200v~240v. If the ampere of the motor is too high, the power may not be good when using the DPS. The customer should contact the company for recommendations before purchasing. This product is used for one motor only, so two units are needed for two motors. The ground wire does not connect to the DPS. Mount this component in a conditioned environment if possible to dissipate heat. If the input and output voltage is between 200-240V, theoretically the phase converter could be used in installation with an electric transformer to supply a VFD well pump controller, but this use of the product is not guaranteed.

Customer Reviews & Ratings

5.0

1 customers ratings

5 Star

100%
4 Star

0%
3 Star

0%
2 Star

0%
1 Star

0%

Review this product

Share your thoughts with other customers

Pros

Can handle motors between 7.5 and 10 hp depending on the ampere of the motor
Can be used for HVAC
Can be used for cycling a pump motor
Can be used for a walk-in cooler compressor
No inrush startup current

Cons

Only applicable for one motor at a time

Product Price History

Important information

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.
Not all the products listed on Ubuy are for sale, as Ubuy is a global search engine. Products are subject to export/trade regulations.

BDT 36115

Order now and get it around Wednesday, September 09

QTY:

Secured transaction

PCI DSS compliant and ISO 27001:2022 certified, with encrypted payments and full buyer protection on every order.

Our Top Logistics Partners

Fastest cross-border delivery

Features & Benefits

Low failure rate
Small size
High efficiency
Affordable price
Can be used with industrial and domestic purpose motors
Semi-permanent life time

Ubuy Assurance

Experience worry-free shopping with 100% original products, PCI DSS-compliant payment security, ISO 27001-certified data protection, the fastest cross-border delivery, free returns ^*, and secure packaging on every order.

DPS Capacity 10HP 30A 220V, Single-Phase to 3-Phase Converter, MY-PS-10 Must Be Only Used for 7.5HP(5.5kW) 23A 220V 3-Phase Motor, One DPS Must Be

BDT 36115

Fast Shipping

Free Return*

Secure Packaging

100% Original Products

PCI DSS Compliance

ISO 27001 Certified

What Stands Out

Product Details

Who Should Buy?

Product Description

Customer Questions & Answers

DPS Power Converters MY-PS-10 Editorial Review

Customer Reviews & Ratings

Review this product

Pros

Cons

Product Price History

Important information

BDT 36115

Features & Benefits

Ubuy Assurance

Fast
Shipping

Free
Return^*